Solary Electricals H7E 110V 1000W Inductive Heater Kit with 10 Coils and Portable Storage Box

SOLARY Barcode: 6971709253926

5.0 / 5.0 based on 1 review


Solary Electricals Magnetic Flameless Induction Heater Kit for Automotive Features:

  • [High working efficiency] By using the electromagnetic fields to heat the ferrous and non-ferrous metals, which is faster and more precise, and efficient than the oxy-acetylene system.
  • [Safety] Equipped with fan cooling and thermal protection.Will not damage nearby heat-sensitive parts. No open flame caused by the heating, to ensure your working environment is safe.
  • [Work area with high illumination (LED)] Get a clearer understanding of the work progress, and see the status of heated objects more clearly. Reinforced heat-stabilized thermoplastic housing provides increased durability inside and out.
  • [10 different sizes of coils] A variety of coil models and sizes can be adapted to work requirements in many ways. Make your workflow smoother.
  • [Aluminum alloy black toolbox] Solid and durable, cool and beautiful. You can carry it away at any time when you go out to work, and while keeping your studio tidy and orderly.

Safety Rules

1. Read the manual carefully before using it.
2. Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more) and that the fixing screws on both sides are fully tightened, and then press the machine start button.
3. Keep your work area clean and well-illuminated.
4. Do not use it in moist surroundings or immerse it in water to electrical shock hazards and machine damage.

Technical Data

  • Voltage: 110V
  • Wattage: 1000W
  • Illumination: LED light at the end
  • Operating Temperature: -40~+60 °C
  • Heating Bolt Diameter: Φ15-40mm
  • Gross Weight: 4.5kg
  • Tool Box Dimensions (L x W x H): 19.29*11.8*5.5 in/ 49*30*11.8cm

Package Include:

  • 1 x Magnetic Induction Heater
  • 1 x Tool Box (Black)
  • Induction Coil Diameter and Quantity:
    1 x 1/2" Tube coil
    1 x 3/4" Tube coil
    1 x 7/8" Tube coil
    1 x 1" Tube coil
    1 x 1-1/4" Tube coil
    1 x 1-1/2" Tube coil
    1 x 1-3/4" Tube coil
    1 x 24" Flexible coil
    1 x 40" Bearing coil
    1 x Round coil

Using range

  • Strip Paint
  • Metal Shrinking
  • Loosen tie-rod ends
  • Paintless dent repair
  • Bending and Forming
  • Remove old body filler
  • Remove car emblems (debugging)
  • Spray-in bed liner removal
  • Flameless frame rail heating
  • Shrink fit bearings and gears
  • Debond rearview mirror brackets
  • Caulking and seam sealer removal
  • Remove and loose core support labels
  • Rapidly cure panel bonding adhesive
  • Instantly cure high solids 1k and 2k primers
  • Easily remove aftermarket chrome rocker panels
  • Easily remove bonded roof panels and other SMC's
  • Remove vinyl stripes without solvent wheels
  • Remove and loose serial number labels located indoor jams
  • Solder large electrical connectors as found on hybrid vehicles
  • Easily remove Torx bolt found in truck bed boxes and seat belts
  • Remove and loose underhood labels for the belt, hose and AC routing
  • Remove and loose OE and aftermarket fender flares... re-use the original tape
  • Vinyl black trim removal from upper door frames between the front and rear windows
  • Remove and loose vent shades, while removing all the tape from the vehicle
  • Loosen studs with thread locking compounds lie the ones holding roof racks in place
  • Thermally expand bearings and pulleys for easy installation, eliminating the need to press them on

Customer Reviews

Based on 1 review
It does what it was designed for.

Unboxed mine and it come in a nice rigid case. It seems hearty and the plastic should stand to light abuse. Mine actually had some rattles straight out of the case. I was concerned it might short something out but I put a wire on it and hit the button while around a nut and bolt. Directions say only hold for a few seconds. 15-25 seconds is more like it.