Solary Electricals Magnetic Flameless Induction Heater Kit for Automotive Features:
[High working efficiency] By using the electromagnetic fields to heat the ferrous and non-ferrous metals, which is faster, more precise and more efficient than the oxy-acetylene system. It adopts high-frequency magnetic fields to heat metal With induction heat.
[Work area with high illumination (LED)] Provides for work area illumination even when you work in the dark—a clear understanding of the work progress and the status of heated objects. Reinforced heat-stabilized thermoplastic housing provides for increased durability inside and outside.
[Wide Application] Suit for loosening seized hardware, vent shades, bearings, gears, pulleys, seat belt parts, torx bolts, lug nuts, in-line applications, fuel tank straps, etc.
[Safety] Equipped with fan cooling and thermal protection. To ensure your safe working environment, you will not damage nearby heat-sensitive parts or open flames caused by the heating.
[Aluminum alloy blue toolbox and eight coils] Solid, durable, calm, and beautiful. You can carry it away when you go out to work while keeping your studio tidy and orderly—4 different sizes of coils, two coils of each size. Various coil models and sizes can be adapted to work requirements in many ways. Make your workflow smoother.
1. Read the manual carefully before using it. 2. Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more), the fixing screws on both sides are fully tightened, and then press the machine start button. 3. Keep your work area clean and well-illuminated. 4. Do not use it in moist surroundings or immerse it in water to electrical shock hazards and machine damage.
Electromagnetic induction heaters are mainly used in auto repair shops, garages, or home environments where bolts must be removed. Suit for loosening seized hardware, vent shades, bearings, gears, pulleys, seat belts part,torx bolts, lug nuts, fuel tank straps, etc.
1. Read the manual carefully before using it.
2. Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more) and that the fixing part on both sides is fully tightened, and then press the machine start button.
3. Keep your work area clean and well-illuminated.
4. Do not use it in moist surroundings or immerse it in water to electrical shock hazard and machine damage.
1 x Magnetic Induction Heater
Induction Coil Diameter and Quantity：
2 x Φ25mm
2 x Φ30mm
2 x Φ45mm
2 x U-shape 600mm coil
1 x Tool Box
Flexibility and Durability
This set contains coils. This machine has a variety of general-purpose rings, of which there are commonly used diameters. Suitable for multiple usage scenarios.
Grainy Frosted Non-Slip Handle
The magnetic induction heater host has a grainy, frosted, non-slip handle, allowing you to use and work efficiently and quickly.
With LED Light
The built-in LED lights at the end, can light up work area to provide clearly view even in dark environment, see the status of heated objects more clearly.
This thing is amazing, heats up bolts, nuts, and studs fast, and safe!
What an amazing toy
I've only had it for a month, so I can't speak to its longevity, but it works amazingly. It heats a hopelessly stuck bolt to red hot in 60 seconds or less, and then the bolts zips right off like magic. Paid for itself on the first job.
This thing is a time saver
I only use it twice so far too the bolt off with just a twist , for those who don't wanna use open flame torch on your car this item work great
michael c skupniewitz
Worked well , broken pieces inside
First use, went well. Very happy
But as I went to put it away I noticed something rattling around loose inside. Afraid it was a screw or metallic that might short it out, decided to take it apart and see what it was. It was a piece of plastic that was supposed to locate and hold the circuit board.. 2 hidden screws under label as shown. Unfortunately there’s still another piece rattling around in there. I assumed it was just one and didn’t notice until back together.
But it works amazingly…
This thing is a Godsend.
I tried the tool out on a broke off exhaust manifold that was badly rusted. I did clean it up with a wire wheel on my grinder. Then I clamped in a vice and tried to loosen the nut with a 14mm wrench. No use, it was frozen solid. I then applied the induction tool coil over the nut and it started smoking in 4 seconds and in 20 seconds it was glowing bright orange. I tried the wrench again and it worked like a charm. Now I no longer fear breaking broken studs or bolts on an exhaust system. It really is a Godsend.