Solary Electricals Magnetic Flameless Induction Heater Kit for Automotive Features:
[High working efficiency] By using the electromagnetic fields to heat the ferrous and non-ferrous metals, which is faster and more precise, and efficient than the oxy-acetylene system.
[Safety] Equipped with fan cooling and thermal protection.Will not damage nearby heat-sensitive parts. No open flame caused by the heating, to ensure your working environment is safe.
[Work area with high illumination (LED)] Get a clearer understanding of the work progress, and see the status of heated objects more clearly. Reinforced heat-stabilized thermoplastic housing provides increased durability inside and out.
[10 different sizes of coils] A variety of coil models and sizes can be adapted to work requirements in many ways. Make your workflow smoother.
[Aluminum alloy black toolbox] Solid and durable, cool and beautiful. You can carry it away at any time when you go out to work, and while keeping your studio tidy and orderly.
1. Read the manual carefully before using it. 2. Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more) and that the fixing screws on both sides are fully tightened, and then press the machine start button. 3. Keep your work area clean and well-illuminated. 4. Do not use it in moist surroundings or immerse it in water to electrical shock hazards and machine damage.
Illumination: LED light at the end
Operating Temperature: -40~+60 °C
Heating Bolt Diameter: Φ15-40mm
Gross Weight: 4.5kg
Tool Box Dimensions (L x W x H): 19.29*11.8*5.5 in/ 49*30*11.8cm
1 x Magnetic Induction Heater
1 x Tool Box (Black)
Induction Coil Diameter and Quantity： 1 x 1/2" Tube coil 1 x 3/4" Tube coil 1 x 7/8" Tube coil 1 x 1" Tube coil 1 x 1-1/4" Tube coil 1 x 1-1/2" Tube coil 1 x 1-3/4" Tube coil 1 x 24" Flexible coil 1 x 40" Bearing coil 1 x Round coil
Loosen tie-rod ends
Paintless dent repair
Bending and Forming
Remove old body filler
Remove car emblems (debugging)
Spray-in bed liner removal
Flameless frame rail heating
Shrink fit bearings and gears
Debond rearview mirror brackets
Caulking and seam sealer removal
Remove and loose core support labels
Rapidly cure panel bonding adhesive
Instantly cure high solids 1k and 2k primers
Easily remove aftermarket chrome rocker panels
Easily remove bonded roof panels and other SMC's
Remove vinyl stripes without solvent wheels
Remove and loose serial number labels located indoor jams
Solder large electrical connectors as found on hybrid vehicles
Easily remove Torx bolt found in truck bed boxes and seat belts
Remove and loose underhood labels for the belt, hose and AC routing
Remove and loose OE and aftermarket fender flares... re-use the original tape
Vinyl black trim removal from upper door frames between the front and rear windows
Remove and loose vent shades, while removing all the tape from the vehicle
Loosen studs with thread locking compounds lie the ones holding roof racks in place
Thermally expand bearings and pulleys for easy installation, eliminating the need to press them on
Unboxed mine and it come in a nice rigid case. It seems hearty and the plastic should stand to light abuse. Mine actually had some rattles straight out of the case. I was concerned it might short something out but I put a wire on it and hit the button while around a nut and bolt. Directions say only hold for a few seconds. 15-25 seconds is more like it.