Solary Magnetic Heat Induction Tool, 1000W 110V Handheld Rusty Screw Removing Tool with 8 Coils

SOLARY Barcode: 6971709254831

4.7 / 5.0 based on 21 reviews

$208.58

  • Electromagnetic Induction Heating】Through the principle of electromagnetic induction, the easy-to-magnetize metal bolts/nuts within the working range of the coil are heated so that the bolts are heated and expanded to take out the bolts quickly. No open flame caused by the heating to ensure your working environment is safe.

  • Reasonable Design】The built-in LED lights at the end allow you to work smoothly in the dark; the Granular non-slip handle is ergonomically designed for a more comfortable grip.

  • Safe to Use】The magnetic induction heater, equipped with a cooling fan and overheating protection, will not damage nearby heat-sensitive parts and prolong the service life of the equipment.

  • Aluminum Alloy Black Tool Box and 8 Coils】Set comes with a solid, durable aluminum alloy black toolbox. You can carry it away when you go out to work while keeping your studio tidy and orderly. Four different sizes of coils, two coils of each size, a variety of coil models and sizes can be adapted to work requirements in many ways. Make your workflow smoother.

  • Wide Range of Uses】 The magnetic induction heater kit is mainly used for heating threaded nuts and rusty screws to loosen them. It can also be used for automobiles, machinery, and various minor Heat treatment of metal parts such as gears, pulleys, bearings, etc.

Flameless Heat Induction Tool
Flameless Heat Induction Tool
Magnetic Induction Heater

Electromagnetic induction heaters are mainly used in auto repair shops, garages, or home environments where bolts must be removed. Suit for loosening seized hardware, vent shades, bearings, gears, pulleys, seat belt parts,torx bolts, lug nuts, fuel tank straps, etc.

Package Content:

 

  • 1 x Magnetic Induction Heater
  • 2 x Φ25mm coil
  • 2 x Φ30mm coil
  • 2 x Φ45mm coil
  • 2 x U-shape 600mm coil
  • 1 x Tool Box

 

Product Specifications:

  • Voltage: 110V
  • Wattage: 1000W
  • Illumination: LED light at the end
  • Operating Temperature: -40~+60 °C
  • Heating Bolt Diameter: Φ15-40mm
  • Gross Weight: 4.5kg
  • Tool Box Dimensions (L x W x H): 49*30*11.8cm/19.29*11.8*5.5in

Details:

Ergonomic handle

Efficient Coolng System

LED Indicator Light

STEPS

application

Flameless heating is safer

Application Scenarios:

Application scenarios

2

3

4

Safety Rules:

 

  • 1. Read the manual carefully before using it.
  • 2. Please note that you must ensure that the coil is fully inserted (the coil plug-in type touches the bottom of the hole and cannot be inserted more), the fixing screws on both sides are fully tightened, and then press the machine start button.
  • 3. Keep your work area clean and well-illuminated.
  • 4. Do not use it in moist surroundings or immerse it in water to electrical shock hazard and machine damage.

 

Customer Reviews

Based on 21 reviews
71%
(15)
24%
(5)
5%
(1)
0%
(0)
0%
(0)
I
Ivy
Awesome tool for extracting tough bolts!

This induction heater worked better than expected! Highly recommend for extracting!

G
Gia
Works as advertised heats quickly what a time saver

I was skeptical of this product but it exceeded my expectations
I used this on some bolts that were rusted from 18 years of Wisconsin snow and salt it heated the bolts up very easy and they came out super easy what a time saver

Y
York
Hot Rod Induction Heater

Works great! Easily heated and helped me remove 28 year rusted exhaust bolts and nuts. Definitely recommend!

X
Xan
Not impressed

Worked ok at best in cold garage and never fully heated stud

H
Hal
Improper safety information.

I was very excited to receive this item. It looked well made.
Then I read the safety note in the box.
DO NOT USE THIS ITEM IF YOU HAVE A PACEMAKER.
I went back to the ordering information and it said nothing about this.
Please note this in your advertisement. This will eliminate purchaser having to take the steps to return it.